Home
Search results “Gnu make file options” for the 2016
How to install drivers for RTL8723BE WIFI in Linux OS and How to fix MAKE file error in Kali Linux
 
11:12
Download the package from git you can either clone them or you can just download them and place them in your home directory https://github.com/amrudesh1/Rl9823be-Drivers.git For Cloning: git clone https://github.com/amrudesh1/Rl9823be-Drivers.git Commands for Terminal: 1.MAKE 2.MAKE INSTALL 3.SUDO MODPROBE -RV RTL8723BE 4.SUDO MODPROBE -V RTL8723BE ANT_SEL=2 5.sudo ip link set wlan0 up(replace the wlan0 with your systems wifi hardware name for that type iwconfig) 6.to make the changes permanent:(echo "options rtl8723be ant_sel=2" | sudo tee /etc/modprobe.d/50-rtl8723be.conf) Thank You Next is regarding a error which you might get when you Give the command MAKE this happens mainly in kali linux due to the header files for fixing this just update the packages using the package installer like this mine is upto date so just install the packages and restart the pc IF THE UPDATING THE PACKAGES DONT FIX THE MAKE FILE ISSUE THEN TRY SKIPPING THE MAKE STEP Any Queries Put it in the comments Below
Views: 14641 Amrudesh Balakrishnan
Archiving and Compression on Linux - Basic tar Commands
 
16:11
ARCHIVING + COMPRESSION ON LINUX: tar -zcvf docs.tar.gz Documents/ DECOMPRESS/UNARCHIVE ON LINUX tar -zxvf docs.tar.gz #################### OPTIONS z - gzip c - create archive f - archive FILE (name file) v - verbose x - extract Table of Contents: Compression + Archiving: 04:25 Decompression: 07:01 Don't do this: 09:34 Examples (Wordpress vs. Joomla): 12:19 Explanation of 'tar' options: 14:33 Full Linux Sysadmin Basics Playlist: https://www.youtube.com/playlist?list=PLtK75qxsQaMLZSo7KL-PmiRarU7hrpnwK Check out my project-based Linux System Administration course (free sample videos): https://www.udemy.com/hands-on-linux-self-hosted-wordpress-for-linux-beginners/?couponCode=tl35 Patreon: https://www.patreon.com/tutorialinux Official Site: https://tutorialinux.com/ Twitter: https://twitter.com/tutorialinux Facebook: https://www.facebook.com/tutorialinux
Views: 30496 tutoriaLinux
How To install MinGW on Windows 10 (GCC & G++)
 
17:42
This is a short guide on how to install MinGW and MSYS using the latest stable. Download the MinGW installer from http://www.mingw.org/wiki/HOWTO_Install_the_MinGW_GCC_Compiler_Suite. (As of this writing, the download link is a bit difficult to find; it’s under “About” in the menu on the left-hand side). You want the file entitled “Automated MinGW Installer” (currently version 5.1.4). Run it and install MinGW. Only the basic package is strictly needed for Cython, although you might want to grab at least the C++ compiler as well. You need to set up Windows’ “PATH” environment variable so that includes e.g. “c:\mingw\bin” (if you installed MinGW to “c:\mingw”). The following web-page describes the procedure in Windows XP (the Vista procedure is similar): http://support.microsoft.com/kb/310519 -------------------Online Courses to learn---------------------------- Blockchain Course - http://bit.ly/2Mmzcv0 Big Data Hadoop Course - http://bit.ly/2MV97PL Java - https://bit.ly/2H6wqXk C++ - https://bit.ly/2q8VWl1 AngularJS - https://bit.ly/2qebsLu Python - https://bit.ly/2Eq0VSt C- https://bit.ly/2HfZ6L8 Android - https://bit.ly/2qaRSAS Linux - https://bit.ly/2IwOuqz AWS Certified Solutions Architect - https://bit.ly/2JrGoAF Modern React with Redux - https://bit.ly/2H6wDtA MySQL - https://bit.ly/2qcF63Z ----------------------Follow--------------------------------------------- My Website - http://www.codebind.com My Blog - https://goo.gl/Nd2pFn My Facebook Page - https://goo.gl/eLp2cQ Google+ - https://goo.gl/lvC5FX Twitter - https://twitter.com/ProgrammingKnow Pinterest - https://goo.gl/kCInUp Text Case Converter - https://goo.gl/pVpcwL -------------------------Stuff I use to make videos ------------------- Stuff I use to make videos Windows notebook – http://amzn.to/2zcXPyF Apple MacBook Pro – http://amzn.to/2BTJBZ7 Ubuntu notebook - https://amzn.to/2GE4giY Desktop - http://amzn.to/2zct252 Microphone – http://amzn.to/2zcYbW1 notebook mouse – http://amzn.to/2BVs4Q3 ------------------Facebook Links ---------------------------------------- http://fb.me/ProgrammingKnowledgeLearning/ http://fb.me/AndroidTutorialsForBeginners http://fb.me/Programmingknowledge http://fb.me/CppProgrammingLanguage http://fb.me/JavaTutorialsAndCode http://fb.me/SQLiteTutorial http://fb.me/UbuntuLinuxTutorials http://fb.me/EasyOnlineConverter
Views: 147739 ProgrammingKnowledge
SPRKKR compile (Intel Compiler)
 
22:21
Sorry, this compile does'nt work. Please use openmpi, insted of intelmpi. ]cp $HOME/Downloads/sprkkr6.3*.tgz ./sprkkr cd sprkkr tar -zxvf sprkkr6.3*.tgz make.inc --------- ############################################################################### # Here the common makefile starts which does depend on the OS #### ############################################################################### # # FC: compiler name and common options e.g. f77 -c # LINK: linker name and common options e.g. g77 -shared # FFLAGS: optimization e.g. -O3 # OP0: force nooptimisation for some routiens e.g. -O0 # VERSION: additional string for executable e.g. 6.3.0 # LIB: library names e.g. -L/usr/lib -latlas -lblas -llapack # (lapack and blas libraries are needed) # BUILD_TYPE: string "debug" switches on debugging options # (NOTE: you may call, e.g. "make scf BUILD_TYPE=debug" # to produce executable with debugging flags from command line) # BIN: directory for executables # INCLUDE: directory for include files # (NOTE: directory with mpi include files has to be properly set # even for sequential executable) ############################################################################### BUILD_TYPE ?= #BUILD_TYPE := debug VERSION = 6.3 ifeq ($(BUILD_TYPE), debug) VERSION := $(VERSION)$(BUILD_TYPE) endif BIN = . #BIN=~/bin #BIN=/tmp/$(USER) #LIB = -lblas -llapack #LIB = $(LIB_MKL) youtu LIB = ${MKLROOT}/lib/intel64/libmkl_blas95_lp64.a ${MKLROOT}/lib/intel64/libmkl_lapack95_lp64.a -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_intel_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_intel_thread.a -Wl,--end-group -lpthread -lm -ldl LIBMPI = ${MKLROOT}/lib/intel64/libmkl_blas95_lp64.a ${MKLROOT}/lib/intel64/libmkl_lapack95_lp64.a ${MKLROOT}/lib/intel64/libmkl_scalapack_lp64.a -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_intel_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_intel_thread.a ${MKLROOT}/lib/intel64/libmkl_blacs_intelmpi_lp64.a -Wl,--end-group -lpthread -lm -ldl # Include mpif.h INCLUDE = -qopenmp -I${MKLROOT}/include/intel64/lp64 -I${MKLROOT}/include OP0 = ifeq ($(BUILD_TYPE), debug) # FFLAGS = -O0 -g # FFLAGS = -O0 -g -Wall -fbounds-check -fbacktrace FFLAGS = -O0 -check all -traceback -fpe0 -g -fp-stack-check -ftrapuv -CU ### for ifort else # FFLAGS = -O2 FFLAGS = -O2 -axSSE4.2 -diag-disable remark ### for ifort endif FC = mpiifort -c $(FFLAGS) $(INCLUDE) LINK = mpiifort $(FFLAGS) $(INCLUDE) MPI=MPI --------- make scfmpi make all make allmpi
UNREAL ENGINE 4 | Compression Best Tricks (Reduce File Size and More!)
 
02:22
A lot of people are zipping up their UE4 projects in a less-than-ideal manner. Let's dive into a neat trick to fix that! ————————– Like what we’re doing? Want to see more? Want to help others with cool projects, tutorials and more – All for the price of free? Well you can donate to our Patreon to help continue to fund our adventures of breaking down the paywall for information; This is 2015; We shouldn’t have to be forced to pay bucket-loads to learn new and exciting things to advance our knowledge / careers / hobbies .etc! Donate now and help us continue our game development teaching adventures! – All the price of totally free for anyone and everyone! Link to Patreon: https://www.patreon.com/Kitatus_studios?ty=h -~-~~-~~~-~~-~-
Views: 4473 KITATUS
EASY ubuntu command ! for  BEGINNERS !!
 
04:28
This video gives an introduction to using the command-line interface terminal, from now on abbreviated to the terminal. There are many varieties of Linux, but almost all of them use similar commands that can be entered from the terminal Commands sudo: Executing Commands with Administrative Privileges The sudo command executes a command with administrative privileges (root-user administrative level), which is necessary, for example, when working with directories or files not owned by your user account. When using sudo you will be prompted for your password. Only users with administrative privileges are allowed to use sudo. Be careful when executing commands with administrative privileges - you might damage your system! You should never use normal sudo to start graphical applications with administrative privileges. Please see RootSudo for more information on using sudo correctly. File & Directory Commands The tilde (~) symbol stands for your home directory. If you are user, then the tilde (~) stands for /home/user pwd: The pwd command will allow you to know in which directory you're located (pwd stands for "print working directory"). Example: "pwd" in the Desktop directory will show "~/Desktop". Note that the GNOME Terminal also displays this information in the title bar of its window. A useful gnemonic is "present working directory." ls: The ls command will show you ('list') the files in your current directory. Used with certain options, you can see sizes of files, when files were made, and permissions of files. Example: "ls ~" will show you the files that are in your home directory. cd: The cd command will allow you to change directories. When you open a terminal you will be in your home directory. To move around the file system you will use cd. Examples: To navigate into the root directory, use "cd /" To navigate to your home directory, use "cd" or "cd ~" To navigate up one directory level, use "cd .." To navigate to the previous directory (or back), use "cd -" To navigate through multiple levels of directory at once, specify the full directory path that you want to go to. For example, use, "cd /var/www" to go directly to the /www subdirectory of /var/. As another example, "cd ~/Desktop" will move you to the Desktop subdirectory inside your home directory. cp: The cp command will make a copy of a file for you. Example: "cp file foo" will make an exact copy of "file" and name it "foo", but the file "file" will still be there. If you are copying a directory, you must use "cp -r directory foo" (copy recursively). (To understand what "recursively" means, think of it this way: to copy the directory and all its files and subdirectories and all their files and subdirectories of the subdirectories and all their files, and on and on, "recursively") mv: The mv command will move a file to a different location or will rename a file. Examples are as follows: "mv file foo" will rename the file "file" to "foo". "mv foo ~/Desktop" will move the file "foo" to your Desktop directory, but it will not rename it. You must specify a new file name to rename a file. To save on typing, you can substitute '~' in place of the home directory. Note that if you are using mv with sudo you can use the ~ shortcut, because the terminal expands the ~ to your home directory. However, when you open a root shell with sudo -i or sudo -s, ~ will refer to the root account's home directory, not your own. rm: Use this command to remove or delete a file in your directory. rmdir: The rmdir command will delete an empty directory. To delete a directory and all of its contents recursively, use rm -r instead. mkdir: The mkdir command will allow you to create directories. Example: "mkdir music" will create a directory called "music". Here is an example of when it would be necessary to execute a command with administrative privileges. Let's suppose that another user has accidentally moved one of your documents from your Documents directory to the root directory. Normally, to move the document back, you would type mv /mydoc.odt ~/Documents/mydoc.odt, but by default you are not allowed to modify files outside your home directory. To get around this, you would type sudo mv /mydoc.odt ~/Documents/mydoc.odt. This will successfully move the document back to its correct location, provided that you have administrative privileges. Running a File Within a Directory So you've decided to run a file using the command-line? Well... there's a command for that too! ./filename.extension
Views: 128 Aman Anku
Add demos/games to A GNU/LINUX ARCADE DISTRIBUTION
 
05:28
After the installation and configuration you might like to add some demos to test or play the emulators. Copy your files to an external hardrive, USB Stick or download them from the LAN or Internet. In this tutorial i use an USB Stick. Boot the PC and select at the boot menu "Boot Display Manager - PC Monitor". Login as user "mame" and password "wahcade". Open the document „binary-config-bios-demos-paths-names.pdf, which is part of the AGLAD documentation. Upper, lower case letters are important in GNU/Linux filenames! 1.) Browse to the „Demo/ROM-files location“ page and check where to put your files. Example: Atari ST Atari ST /video/emulators/atari/st/roms/best-demos/ *.zip Copy your Atari ST demo files to /video/emulators/atari/st/roms/best-demos/ . Wah!Cade will expect the file extension „zip“. Other extensions won't work in this configuration. 2.) Browse to the „BIOS-file(s) location“ page to check whether a bios file for your emulator is needed or not. Example: Atari ST Atari ST /video/emulators/atari/st/bios/bios.bin - The Atari ST emulator needs a bios file, named „bios.bin“ - under the location: /video/emulators/atari/st/bios/. Copy the files to the correct path. Open a terminal (rightclick on the desktop and select lxterminal) and type: sudo chown -R mame:mame /home/mame sudo chown -R mame:mame /video/emulators Testing the new files, type: wahcade -d (quit wahcade with ALT+F4) If something went wrong you can see the error messages in the terminal! To update the demo/game list: press „2“ to open the Wah!Cade menu, select „Games List Options“, press „1“, select „Generate List...“, press „1“. ------------------------------------------ Music: Jochen Hippel - Ghostbattle
Views: 271 Wah Cade
How to Archive, Compress and Extract Files Using the tar Command on Linux
 
06:18
How to Archive, Compress and Extract Files Using the tar Command on Linux. The Linux “tar” stands for tape archive, which is used by large number of Linux/Unix system administrators to deal with tape drives backup. The tar command on Linux is often used to create .tar.gz or .tgz archive files, also called “tarballs.” This command has a large number of options. The GNU tar command included with Linux distributions has integrated compression. It can create a .tar archive and then compress it with gzip or bzip2 compression in a single command. That’s why the resulting file is a .tar.gz file or .tar.bz2 file. 🌸 Support channel & make donation : https://www.paypal.me/aminenina/5 🌸 Subscribe for more videos : Youtube: https://www.youtube.com/user/aminosni... 🌸 Follow me On Social Media Facebook : https://www.facebook.com/aminosninatos/ *********************************************************************** 🌸 How To Check Bad Blocks Or Bad Sectors On a Hard Disk In Linux https://www.youtube.com/watch?v=jE-I9... 🌸 Linux How To Partition a Hard Drive Using the Parted Command https://www.youtube.com/watch?v=2IoEW... 🌸 Checking or Repairing a File System using fsck in Linux https://www.youtube.com/watch?v=CcV_M... 🌸 How To Monitor the Health of Your Hard Drive in Linux using SMART https://www.youtube.com/watch?v=z1z9R... 🌸 Linux iotop: Monitor your disk Input/Output https://www.youtube.com/watch?v=pWG4v... 🌸 How To use the “du” (Disk Usage) Command in Linux https://www.youtube.com/watch?v=RA4bM... 🌸 How To View Manipulate System Logs In Linux Using Journalctl Command https://www.youtube.com/watch?v=NE-fT-Fwvgw&t=3s 🌸 How To Sync And Backup Files In Linux Using Rsync Command https://www.youtube.com/watch?v=aIMbg7vG6Rg&t=10s 🌸 Linux cURL Command Tips and Tricks https://www.youtube.com/watch?v=hA3BAALWFJI 🌸 Linux tail and multitail commands https://www.youtube.com/watch?v=QnPyWNyCn-U 🌸 Linux How To view Log Files https://www.youtube.com/watch?v=CEYhs_9L01M&t=2s 🌸 How To use the History Command On Linux https://www.youtube.com/watch?v=RkxIWlypB-s 🌸 Tips and Tricks How To manipulate Text Files on Linux https://www.youtube.com/watch?v=Zk9M1w55XO0 🌸 How to Archive, Compress and Extract Files Using the tar Command on Linux https://www.youtube.com/watch?v=8j-ZzOfbclM&t=2s 🌸 Linux - How to split larger files into smaller parts https://www.youtube.com/watch?v=DaC5AWjmQXk 🌸 Linux commands : Top https://www.youtube.com/watch?v=RM7ck63mcHQ ***********************************************************************
Views: 1319 Liv4IT
Run C Program in Command Prompt
 
03:11
Download TDM GCC Compiler : http://tdm-gcc.tdragon.net/download to compile in cmd type : gcc -o hello hello.c (gcc -o executableFile sourceCodeFile.c) to execute : hello or .\hello Note : here my program file name is hello
Views: 277207 Learning Strugglers
Visual Studio 2017  Linux development with C++
 
11:44
Get an overview of the new Linux C++ development workload in Visual Studio 2017. Download VS 2017 and try the new Linux development with C++ workload, everything you need to know is here: http://aka.ms/vslinux
Boot process in Linux
 
04:12
Linux Booting Process Steps: 6 Stages of Linux Boot Process (Startup Sequence) Press the power button on your system, and after few moments you see the Linux login prompt MUSIC CREDITS :ON MY WAY KEVIN MACLEOD-IN COMPETECH.COM https://creativecommons.org/licenses/by/3.0/ ISRC: USUAN1600062 Have you ever wondered what happens behind the scenes from the time you press the power button until the Linux login prompt appears? The following are the 6 high level stages of a typical Linux boot process. 1. BIOS BIOS stands for Basic Input/Output System Performs some system integrity checks Searches, loads, and executes the boot loader program. It looks for boot loader in floppy, cd-rom, or hard drive. You can press a key (typically F12 of F2, but it depends on your system) during the BIOS startup to change the boot sequence. Once the boot loader program is detected and loaded into the memory, BIOS gives the control to it. So, in simple terms BIOS loads and executes the MBR boot loader. 2. MBR MBR stands for Master Boot Record. It is located in the 1st sector of the bootable disk. Typically /dev/hda, or /dev/sda MBR is less than 512 bytes in size. This has three components 1) primary boot loader info in 1st 446 bytes 2) partition table info in next 64 bytes 3) mbr validation check in last 2 bytes. It contains information about GRUB (or LILO in old systems). So, in simple terms MBR loads and executes the GRUB boot loader. 3. GRUB GRUB stands for Grand Unified Bootloader. If you have multiple kernel images installed on your system, you can choose which one to be executed. GRUB displays a splash screen, waits for few seconds, if you don’t enter anything, it loads the default kernel image as specified in the grub configuration file. GRUB has the knowledge of the filesystem (the older Linux loader LILO didn’t understand filesystem). Grub configuration file is /boot/grub/grub.conf (/etc/grub.conf is a link to this). The following is sample grub.conf of CentOS. #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/boot/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-194.el5PAE) root (hd0,0) kernel /boot/vmlinuz-2.6.18-194.el5PAE ro root=LABEL=/ initrd /boot/initrd-2.6.18-194.el5PAE.img As you notice from the above info, it contains kernel and initrd image. So, in simple terms GRUB just loads and executes Kernel and initrd images. 4. Kernel Mounts the root file system as specified in the “root=” in grub.conf Kernel executes the /sbin/init program Since init was the 1st program to be executed by Linux Kernel, it has the process id (PID) of 1. Do a ‘ps -ef | grep init’ and check the pid. initrd stands for Initial RAM Disk. initrd is used by kernel as temporary root file system until kernel is booted and the real root file system is mounted. It also contains necessary drivers compiled inside, which helps it to access the hard drive partitions, and other hardware. 5. Init Looks at the /etc/inittab file to decide the Linux run level. Following are the available run levels 0 – halt 1 – Single user mode 2 – Multiuser, without NFS 3 – Full multiuser mode 4 – unused 5 – X11 6 – reboot Init identifies the default initlevel from /etc/inittab and uses that to load all appropriate program. Execute ‘grep initdefault /etc/inittab’ on your system to identify the default run level If you want to get into trouble, you can set the default run level to 0 or 6. Since you know what 0 and 6 means, probably you might not do that. Typically you would set the default run level to either 3 or 5. 6. Runlevel programs When the Linux system is booting up, you might see various services getting started. For example, it might say “starting sendmail …. OK”. Those are the runlevel programs, executed from the run level directory as defined by your run level. Depending on your default init level setting, the system will execute the programs from one of the following directories. Run level 0 – /etc/rc.d/rc0.d/ Run level 1 – /etc/rc.d/rc1.d/ Run level 2 – /etc/rc.d/rc2.d/ Run level 3 – /etc/rc.d/rc3.d/ Run level 4 – /etc/rc.d/rc4.d/ Run level 5 – /etc/rc.d/rc5.d/ Run level 6 – /etc/rc.d/rc6.d/ Please note that there are also symbolic links available for these directory under /etc directly. So, /etc/rc0.d is linked to /etc/rc.d/rc0.d. Under the /etc/rc.d/rc*.d/ directories, you would see programs that start with S and K. Programs starts with S are used during startup. S for startup. Programs starts with K are used during shutdown. K for kill. There are numbers right next to S and K in the program names. Those are the sequence number in which the programs should be started or killed. For example, S12syslog is to start the syslog deamon, which has the sequence number of 12. S80sendmail is to start the sendmail daemon, which has the sequence number of 80. So, syslog program will be started before sendmail. There you have it. That is what happens during the Linux boot process.
Views: 80161 Linux Query
Parameters Arguments Linux Shell Script Tutorial
 
06:24
http://filmsbykris.com http://www.patreon.com/metalx1000 This video was sponsored by: Karl Arvid John Tedesco - http://stainlesssteeltoolwrap.com/ Steven C. Morreale For help: http://filmsbykris.com/irc FaceBook: https://www.facebook.com/pages/Films-By-Kris/225113590836253
Views: 14556 Kris Occhipinti
Linux Command Line Tutorial For Beginners 2 - ls command in Linux
 
17:15
Find More On My Website - http://www.codebind.com/linux-tutorials/linux-man-page-ls-command/ ls command Lists the files in the current directory, in alphanumeric order, except files starting with the “.” character. ls lists information about the FILEs (the current directory by default). Sort entries alphabetically if none of -cftuvSUX nor --sort is specified. Linux and UNIX ls command help and examples ls command in linux. ls - Unix, Linux Command. ls - Linux Command - Unix Command Linux man page - ls command. cd command in linux. cat command in linux. grep command in linux. pwd command in linux. mkdir command in linux. cp command in linux. ls command in linux. ln command in linux -------------------Online Courses to learn---------------------------- Data Analytics with R Certification Training- http://bit.ly/2rSKHNP DevOps Certification Training - http://bit.ly/2T5P6bQ AWS Architect Certification Training - http://bit.ly/2PRHDeF Python Certification Training for Data Science - http://bit.ly/2BB3PV8 Java, J2EE & SOA Certification Training - http://bit.ly/2EKbwMK AI & Deep Learning with TensorFlow - http://bit.ly/2AeIHUR Big Data Hadoop Certification Training- http://bit.ly/2ReOl31 AWS Architect Certification Training - http://bit.ly/2EJhXjk Selenium Certification Training - http://bit.ly/2BFrfZs Tableau Training & Certification - http://bit.ly/2rODzSK Linux Administration Certification Training-http://bit.ly/2Gy9GQH ----------------------Follow--------------------------------------------- My Website - http://www.codebind.com My Blog - https://goo.gl/Nd2pFn My Facebook Page - https://goo.gl/eLp2cQ Google+ - https://goo.gl/lvC5FX Twitter - https://twitter.com/ProgrammingKnow Pinterest - https://goo.gl/kCInUp Text Case Converter - https://goo.gl/pVpcwL ------------------Facebook Links ---------------------------------------- http://fb.me/ProgrammingKnowledgeLearning/ http://fb.me/AndroidTutorialsForBeginners http://fb.me/Programmingknowledge http://fb.me/CppProgrammingLanguage http://fb.me/JavaTutorialsAndCode http://fb.me/SQLiteTutorial http://fb.me/UbuntuLinuxTutorials http://fb.me/EasyOnlineConverter
Views: 159320 ProgrammingKnowledge
batch files -- Simply with Linux Gnu
 
03:47
في هذا الدرس سنتعلم كيفية استعمال الملفات الدفعية أو مايسمى ب batch files
Views: 116 Simply ببساطة
Metasploit  #7:  Download ,upload,create folder and files in Windows machine
 
08:08
This video shows How to move around create files and folders,download,upload files in Windows victim machine Please Subscribe for more tips and visit below http://www.thegeeky.space Thumbs up if this helps you :-)
Views: 9338 thegeekyspace
How to configure Network Adapter in Kali Linux using Command Line Interface (CLI)
 
04:59
A step by step guide to configure network settings in Kali Linux using DHCP and a Static IP address. I'm very thankful to like and share this video:) Thanks for watching!
Views: 114635 LogicalSecurity
GnuCash Basics (English)
 
20:10
Hey Guys! This is a video about GnuCash, an accounting software. Here we will set up our first GnuCash-Project, have a look at the online banking functions and do some transactions. I hope you enjoy it!
Views: 27432 Test IT
Fix Code Blocks Environment Error Can't find compiler executable in your search path
 
02:08
An easy fix for Code Blocks Environment Error: Can't find compiler executable in your search path. #Codeblockserror Link for MinGW: https://sourceforge.net/projects/mingw/?source=dlp
Views: 321595 Sid's E Classroom
Save or Export an Image as JPEG, PNG, GIF, etc - GIMP 2.8 for Beginners
 
02:20
Learn GIMP For Beginners 50% Off ►► http://bit.ly/LearnGIMPHalfOff ◢◤◣◥◢◤◣◥◢◤◣◥◢◤◣◥ Learn Video Editing - Complete Guide to DaVinci Resolve Course ($5 Off) This tutorial will show you how to save or export your finished work within GIMP. Surprisingly it's not the save or save as function. My Patreon ►►http://patreon.com/christutorials Goldbox Deals ►► http://amzn.to/1ZKi4j8 Good Web Hosting (Code: CTUTS) ►► http://bit.ly/1RPog54 Visit My Site ►► http://chrisnavarre.com Subscribe ►►http://bit.ly/clickheretosubCC
Views: 87182 Chris' Tutorials
GnuCash - How to create a Budget
 
21:19
Hey Guys! This Episode is about creating a budget in GnuCash. I hope you enjoy it - feel free to leave a comment! Yours, Felix
Views: 12538 Test IT
Windows Command Line Tutorial - 1 - Introduction to the Command Prompt
 
07:31
Facebook - https://www.facebook.com/TheNewBoston-464114846956315/ GitHub - https://github.com/buckyroberts Google+ - https://plus.google.com/+BuckyRoberts LinkedIn - https://www.linkedin.com/in/buckyroberts reddit - https://www.reddit.com/r/thenewboston/ Support - https://www.patreon.com/thenewboston thenewboston - https://thenewboston.com/ Twitter - https://twitter.com/bucky_roberts
Views: 619061 thenewboston
GRUB Bootloader Fix: How to Boot in to Windows After Installing/Deleting Ubuntu Linux
 
04:10
Get The Complete Linux Administration Course Bundle! https://josephdelgadillo.com/product/linux-course-bundle/ After installing Ubuntu Linux, type the following commands in to the terminal to updated GRUB and to see the option to boot in to Windows: sudo update-grub After deleting the Linux partitions from your hard drive, do a live boot in to Linux (Try Ubuntu without installing) and type the following command in to the terminal to boot back in to Windows: sudo apt-get install lilo Hit enter then: sudo lilo -M /dev/sda mbr Web - https://josephdelgadillo.com Subscribe - https://bit.ly/SubscribeJTD Facebook - https://www.facebook.com/delgadillojt Discord - https://discord.gg/EbcQFrg Instagram - https://www.instagram.com/jo3potato
Views: 174922 Joseph Delgadillo
How to change and set default OS Grub bootloader kali linux 2 0
 
04:01
How to change and set default OS Grub bootloader kali linux 2.0 today i try change bootloader grub kali linux 2.0 , change first position in grub to be windows 7 , or another os
Views: 18448 Sigit Nurhanafi
WIEN2k (gfortran + gcc + MKL + OpenMP)
 
08:18
WIEN2k (gfortran + MKL + OpenMP) sudo apt-get install csh sudo apt-get install tk sudo apt-get install gfortran sudo apt-get install build-essential Intel® Math Kernel Library (Intel® MKL) Link Line Advisor v4.6 file:///opt/intel/documentation_2016/ja/mkl/common/mkl_link_line_advisor.htm 1) mkdir WIEN2k_14 2) cd WIEN2k_14 3) cp WIEN2k_14.tar . 4) tar -xvf WIEN2k_14.tar 5) gunzip *.gz 6) chmod +x ./expand_lapw 7) ./expand_lapw 8) ./siteconfig_lapw 9) V gfortran + gotolib 10) gfortran, gcc 11) O Compiler options: -ffree-form -O2 -ffree-line-length-none -msse4.2 -fopenmp -m64 -I${MKLROOT}/include L Linker Flags: $(FOPT) P Preprocessor flags '-DParallel' R R_LIB (LAPACK+BLAS): -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_gf_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_gnu_thread.a -Wl,--end-group -lpthread -lm -ldl 12) ./userconfig_lapw 13) bash 14) w2web
Views: 3397 Abinitio Calculation
SPR-KKR (intel compiler, openmpi)
 
06:07
Attention ! Please, check intelmpi and openmpi. make.inc --------- ############################################################################### # Here the common makefile starts which does depend on the OS #### ############################################################################### # # FC: compiler name and common options e.g. f77 -c # LINK: linker name and common options e.g. g77 -shared # FFLAGS: optimization e.g. -O3 # OP0: force nooptimisation for some routiens e.g. -O0 # VERSION: additional string for executable e.g. 6.3.0 # LIB: library names e.g. -L/usr/lib -latlas -lblas -llapack # (lapack and blas libraries are needed) # BUILD_TYPE: string "debug" switches on debugging options # (NOTE: you may call, e.g. "make scf BUILD_TYPE=debug" # to produce executable with debugging flags from command line) # BIN: directory for executables # INCLUDE: directory for include files # (NOTE: directory with mpi include files has to be properly set # even for sequential executable) ############################################################################### BUILD_TYPE ?= #BUILD_TYPE := debug VERSION = 6.3 ifeq ($(BUILD_TYPE), debug) VERSION := $(VERSION)$(BUILD_TYPE) endif BIN = . #BIN=~/bin #BIN=/tmp/$(USER) #LIB = -lblas -llapack #LIB = $(LIB_MKL) youtu LIB = ${MKLROOT}/lib/intel64/libmkl_blas95_lp64.a ${MKLROOT}/lib/intel64/libmkl_lapack95_lp64.a -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_intel_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_intel_thread.a -Wl,--end-group -lpthread -lm -ldl LIBMPI = ${MKLROOT}/lib/intel64/libmkl_blas95_lp64.a ${MKLROOT}/lib/intel64/libmkl_lapack95_lp64.a ${MKLROOT}/lib/intel64/libmkl_scalapack_lp64.a -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_intel_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_intel_thread.a ${MKLROOT}/lib/intel64/libmkl_blacs_openmpi_lp64.a -Wl,--end-group -lpthread -lm -ldl # Include mpif.h #INCLUDE = -I/usr/lib/openmpi/include # openmpi-1.10.3 (./configure -prefix=$HOME/openmpi CXX=icpc CC=icc FC=ifort) INCLUDE = -qopenmp -I${HOME}/openmpi/include OP0 = ifeq ($(BUILD_TYPE), debug) # FFLAGS = -O0 -g # FFLAGS = -O0 -g -Wall -fbounds-check -fbacktrace FFLAGS = -O0 -check all -traceback -fpe0 -g -fp-stack-check -ftrapuv -CU ### for ifort else # FFLAGS = -O2 FFLAGS = -O2 -axSSE4.2 -diag-disable remark ### for ifort endif FC = mpif90 -c $(FFLAGS) $(INCLUDE) LINK = mpif90 $(FFLAGS) $(INCLUDE) MPI=MPI --------- ■ SPRKKR 6.3 (Intel compiler 2016) 1) unpack cp $HOME/Downloads/sprkkr6.3*.tgz ./sprkkr cd sprkkr tar -zxvf sprkkr6.3*.tgz 2) cp make.inc_example make.inc 3) gedit make.inc LIB = ${MKLROOT}/lib/intel64/libmkl_blas95_lp64.a ${MKLROOT}/lib/intel64/libmkl_lapack95_lp64.a -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_intel_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_intel_thread.a -Wl,--end-group -lpthread -lm -ldl #LIB = $(LIB_MKL) LIBMPI = ${MKLROOT}/lib/intel64/libmkl_blas95_lp64.a ${MKLROOT}/lib/intel64/libmkl_lapack95_lp64.a ${MKLROOT}/lib/intel64/libmkl_scalapack_lp64.a -Wl,--start-group ${MKLROOT}/lib/intel64/libmkl_intel_lp64.a ${MKLROOT}/lib/intel64/libmkl_core.a ${MKLROOT}/lib/intel64/libmkl_intel_thread.a ${MKLROOT}/lib/intel64/libmkl_blacs_openmpi_lp64.a -Wl,--end-group -lpthread -lm -ldl INCLUDE = -qopenmp -I${MKLROOT}/include/intel64/lp64 -I${MKLROOT}/include FFLAGS = -O2 -axAVX,SSE4.2,SSE4.1,SSE3,SSSE3,SSE2 \ -diag-disable remark ### for ifort FC = mpiifort -c $(FFLAGS) $(INCLUDE) LINK = mpiifort $(FFLAGS) $(INCLUDE) 4) make scfmpi(single type: make scf ) mpirun -n 4 kkrscf6.3MPI *.inp (symbol: larger than) OUTPUT 5) compiling a) make all gen, scf, embgen, embscf b) make allmpi scfmpi, embscfmpi, specmpi c) Makefile make genmpi, make embscfmpi, make chi make opm, make opmmpi, make spec ※ recompile: make clean Usage 1) cif2cell -p sprkkr -f case.f 2) xband 3) DIRECTORIES 4) SELECT/MODIFY case.sys 5) SPR-KKR * MKL link /opt/intel/documentation_2016/en/mkl/ps2016/get_started.htm file:///opt/intel/documentation_2016/en/mkl/common/mkl_link_line_advisor.htm
Customizing KDE Plasma 5 - Add Open As Root to Dolphin (No Longer Works)
 
06:56
In this video, we discuss the actual solution to the problem that I had posted in this video https://www.youtube.com/watch?v=MORac3RQE90 yesterday Thank you to Steven Parrish for offering the best solution to make it work. https://www.youtube.com/user/stevemp1954 The Original code that Steven posted [Desktop Entry] Type=Service X-KDE-ServiceTypes=KonqPopupMenu/Plugin MimeType=inode/directory; Actions=openRootDolphinHere; X-KDE-AuthorizeAction=shell_access [Desktop Action openRootDolphinHere] Name=Open Root Dolphin Here TryExec=kdesudo Exec=kdesudo dolphin %U Icon=folder-red Save as root_dolphin.desktop My modified version with the generic icon [Desktop Entry] Type=Service X-KDE-ServiceTypes=KonqPopupMenu/Plugin MimeType=inode/directory; X-KDE-Priority=TopLevel X-KDE-Submenu=&Root Actions Actions=openRootDolphin;openRootTerminal; X-KDE-AuthorizeAction=shell_access [Desktop Action openRootDolphin] Name=Open Root Dolphin TryExec=kdesudo Exec=kdesudo dolphin %U Icon=folder-red [Desktop Action openRootTerminal] Name=Open Root Terminal TryExec=kdesudo Exec=kdesudo konsole %U Icon=folder-red -~-~~-~~~-~~-~- Don't Miss: "Ballistic Overkill on Linux Compilation" https://www.youtube.com/watch?v=NGuS7UKW_RY -~-~~-~~~-~~-~-
Views: 7093 BigDaddyLinux
Fix .exe has stopped working  or windows explorer has stopped working
 
05:43
Solved: ".exe has stopped working" "windows explorer not working" "fix windows explorer" "fix windows explorer has stopped working" " .exe file stopped". In this Video I have two CMD (command prompt) options for solve this problem on windows 7 64 bit and 32 bit User I already made a video for this error you can find out with this link : https://youtu.be/pBRyL0BqKT8 Fix : "internet explorer has stopped working" click this link : https://youtu.be/kvhXPDfb_ds Hope this will work for you DONATE TO DEEZ- PAYPAL DONATE BUTTON DOESN'T SUPPORT IN INDIA, BUT YOU CAN DO BY USING THIS LINK.: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BRZVDCMQNWVH2 Any amount you can give is welcome.. Video Content: option First 1: UnInstall application 2: Open cmd as administrative mode 3: type bcdedit.exe /set nx AlwaysOff (for disable DEP) [ This option may won't work with windows 8,8.1 and 10. some cases 64bit OS also won't work. For that you need to disable Secure Boot Policy ] Check out How to disable Secure Boot Policy in this Link: https://youtu.be/S0sY0DWtRNw 4: Restart the computer . 5: Install the Application 6: Re enable DEP Open cmd and run as Administrator type bcdedit.exe /set nx AlwaysOn Restart . Second Option: May this will work without uninstall your application 1: Run cmd as administrator 2: Type bcdedit /set nx OptOut 3: Restart 4: Open My computer - Right click and Properties - On right side select advanced advanced system settings - On performance section select settings - Data execution prevention - turn on DEP for all programs and services except those i select - Add and choose your application .exe file then open. 5. Restart the computer Also you can do this option with uninstall your application . But you need add the .exe file of that program to DEP before you install . I created this video for educational purpose . Thanks for watch For more Subscribe Copyright Reserved © - 2015-16 All rights to this video is owned DEEZ : www.deezzone.com The video obeys the YouTube Community Guidelines and NO copyright content is present in this video. For Educational Purpose Only. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for -fair use- for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use Copyright Reserved © - 2015-16
Views: 347253 DEE Z
4/10- HDF5 with Python: How to Read HDF5 Files
 
03:52
Visit my personal web-page for the Python code: www.imperial.ac.uk/people/n.sadawi
Views: 15265 Noureddin Sadawi
How To Remove Write Protection From USB Flash Drive In Ubuntu Linux
 
02:35
Trying serveral different methods to Format it like: 1. Regedit --- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies. Change the value for the key "WriteProtect" to 0 in Windows. 2. Through MS DOS in the Computer Startup in Microsoft Windows. 3. Through Disk Management. 4. HP USB Drive Format Tool. every time it gives the same error "The Disk is Write Protected" What u need is GNU\Linux. It solved my problem very easily. In this video i have set the read-only service to 0 i.e. making it off. and enabling the default r/w i.e. read-write permission for files. To turn off disk device`s write protect, we use the low level system utility hdparm like this: sudo hdparm -r0 /dev/sdb where we asume that /dev/sdb is the Physical disk device we're working on. If the device has partitions that are mounted as read-only, you should re-mount 'em as read-write in order to write data to them.
Views: 80005 DevTech Solutions
How to Solve CodeBlocks environment error. (100% Solved)
 
07:06
##Tune Research. Hello Guys, Today,I'm gonna a show you , "How to Solve CodeBlocks environment error." *** How to Download and install CodeBlocks.*** Direct Download link: http://kent.dl.sourceforge.net/project/codeblocks/Binaries/16.01/Windows/codeblocks-16.01mingw-setup.exe ______________________________________________ ***Now, How to Solve CodeBlocks environment error. 1. Go to "Settings"----"Compiler"----"Selected compiler"( GNU GCC Compiler ). 2. Than, Selected "Toolchain executables". 3. Now, "( C:\Program Files (x86)\CodeBlocks\MinGW )" And ,It"s Done. ****If, you have any problem, please comments.***** Please, Hit that SUBSCRIBE button now ! Subscribe link: https://www.youtube.com/channel/UCfNgXLpbBxPFFxqvgfqYJ-g?sub_confirmation=1 *** Follow us socially*** Blog: http://tuneresearchbd.blogspot.com Facebook page: https://www.facebook.com/tuneresearch Google plus: https://plus.google.com/u/2/103180949014604502211 For more video: https://youtu.be/7hgu_DzOH24 + https://youtu.be/kMEfVXD8ags
Views: 58622 Tune Research
Cygwin Must Have Packages - Ultimate Setup
 
27:27
For any updates to the Cygwin ultimate setup, I'll add to the description. Follow the description for any extra commands you don't see in the video. Cygwin Must Have Packages - Tutorial Table of Contents Cygwin: 3:05 https://www.cygwin.com/ Packages 4:30 ======== lynx, wget, curl, rsync python, python3 bzip, tar bash-completion vim, vim-common tmux git diffutils make gcc-c, gcc-g++, gcc-fortran openssh Useful Stuff 11:15 ========== cd /bin curl https://github.com/git/git/raw/master/contrib/completion/git-completion.bash -OL -k # Demonstration of loading a file with bash commands source git-completion.bash # Greater than sign is not allowed in the description. Change greaterThanSign to a greater than sign. cd ~ lynx -source rawgit.com/transcode-open/apt-cyg/master/apt-cyg greaterThanSign apt-cyg OR curl rawgit.com/transcode-open/apt-cyg/master/apt-cyg -OL -k install apt-cyg /bin apt-cyg install nano apt-cyg install zip apt-cyg install unzip nano ~/.bashrc # Add the following to ~/.bashrc (~/.bashrc is a settings file that runs commands every time the terminal opens) alias desktop="cd C:/Users/huyle/Desktop" alias open='cygstart' alias reload='source ~/.bash_profile' # Curly braces are not allowed in the description. Substitute the following spaces with opening and closing curly braces like the video. export PATH="$ HOME /bin:$ PATH " # Forgot to add this following line to ~/.bashrc in the video source /bin/git-completion.bash # Save and quit source ~/.bashrc Tabs and Hotkeys 18:00 ============== We'll use Console2 Console2: https://sourceforge.net/projects/console/files/?source=navbar Integrate with Command Prompt 24:00 =========================== For 64 bit, add C:\Users\huyle\Desktop\cygwin64\bin; to the end of the environment variables. Twitter: https://twitter.com/microwavesam Blog: http://slothparadise.com Consider supporting our group in making stuff: ►https://www.patreon.com/slothparadise
Views: 35928 MicrowaveSam
nRF51822 #14: Entwicklung unter eclipse neon
 
07:43
Entwicklung mit dem #nRF51822 unter eclipse neon mit dem ubuntu Betriebssystem. 1# ST-Link V2 und openocd installieren https://www.youtube.com/watch?v=BzTcqwFI1m4 Zusammenfassung ST-Link V2 USB Treiber: sudo apt-get install git sudo apt-get install autoconf sudo apt-get install libusb-1.0-0-dev git clone https://github.com/texane/stlink stlink.git cd stlink.git/ ./autogen.sh ./configure make sudo cp st-* /usr/bin find . -name "*.rules" sudo cp ./etc/udev/rules.d/49-stlinkv2.rules /etc/udev/rules.d sudo udevadm control --reload-rules sudo udevadm trigger lsusb Zusammenfassung openocd: git clone git://git.code.sf.net/p/openocd/code openocd-code cd openocd-code/ ./bootstrap ./configure make sudo make install openocd -d2 -f openocd.cfg openocd.cfg siehe https://github.com/pcbreflux/nordic/blob/master/nRF51822/openocd.cfg #2 nRF51822 #3: Installation gcc und nRF51 sdk https://www.youtube.com/watch?v=xw9vnsh1hcc GNUARM Download z.B. bei Lauchpad https://launchpad.net/gcc-arm-embedded/+download z.B. die Linux Version https://launchpad.net/gcc-arm-embedded/5.0/5-2016-q1-update/+download/gcc-arm-none-eabi-5_3-2016q1-20160330-linux.tar.bz2 (auspacken mit tar xvjf [quelle]) Nordic nRF5 SDK Download z.B. bei nordic https://developer.nordicsemi.com z.B. die v10 Version https://developer.nordicsemi.com/nRF5_SDK/nRF51_SDK_v10.x.x/nRF51_SDK_10.0.0_dc26b5e.zip oder die v11 Version https://developer.nordicsemi.com/nRF5_SDK/nRF5_SDK_v11.x.x/nRF5_SDK_11.0.0_89a8197.zip oder die v12 Version https://developer.nordicsemi.com/nRF5_SDK/nRF5_SDK_v12.x.x/nRF5_SDK_12.0.0_12f24da.zip (auspacken mit unzip [quelle]) #3 Installtion Oracle Java 8 sudo add-apt-repository ppa:webupd8team/java sudo apt-get update sudo apt-get install oracle-java8-installer #4 eclipse neon runterladen und installieren (z.B. 64 Bit) https://eclipse.org/ https://www.eclipse.org/downloads/download.php?file=/oomph/epp/neon/R/eclipse-inst-linux64.tar.gz&mirror_id=1190 Datei eclipse-inst-linux64.tar.gz z.B. nach $HOME/eclipse auspacken Datei $HOME/eclipse/eclipse-installer/eclipse-inst ausführen #5 GNU ARM Eclipse Plug-ins installieren siehe auch http://gnuarmeclipse.github.io/plugins/install/ Eclipse starten Menu Help - Install new Software - Add... name: GNU ARM Eclipse Plug-ins URL: http://gnuarmeclipse.sourceforge.net/updates - Installation durchführen - Auswählen GNU ARM C/C++ Cross Compiler, GNU ARM C/C++ OpenOCD Debugging, GNU ARM C/C++ Packs (Optional) - GNU ARM Pfad wählen z.B. $HOME/nordic/gcc-arm-none-eabi-5_3-2016q1/ und Eclipse neu starten ... #6 Projekt vorbereiten Damit alle Includes nicht von eclipse verwaltete werden, sondern über das Makefile abgeleitet werden. Sonst werden unnötig Fehler und Warnungen angezeigt. Project Properties - C/C++ Build Uncheck "Use default Build command" Uncheck "Genarate Makefile automaticly" Build directory ${workspace_loc:/project} Project Properties - C/C++ General - CDT build output parser Eingabe bei Compiler Command Pattern: (.*gcc)|(.*[gc]\+\+) Refresh Clean Project #7 Make Targets einrichten Project Properties - Make Targets - Create für z.B. all, flash, clean einrichten Ausführen im Fenster "Make Target" #8 openocd und gdb Debugging einrichten und starten Menü Run - Debug Configurations ... GDB OpenOcd Debugging - Project - Projectdatei.out in C/C++ Application einstellen Bei Karteireiter "Debugger" Config Option "-f ../openocd.cfg" einstellen bzw. Dateipfad für openocd.cfg eingeben starten mit "Debug" und wechsel in die Debug Perspective Weiter Infos: https://devzone.nordicsemi.com/tutorials/7/ http://gnuarmeclipse.github.io/debug/openocd/
Views: 1652 pcbreflux
Linux Command Line Tutorial #4 (Part 1) - Exploring The System
 
05:04
Linux Command Line Tutorial #4 (Part 1) Content: :# Exploring the system :# More fun with ls :# Common ls options :# A longer look at long format :# Determing a file's type with file command Linux Command Line Tutorial's Playlist: http://adfoc.us/29065060897619 Support me: https://www.patreon.com/srbinhacking Subscribe my channel for more educative videos!
Views: 134 Hack Enthusiast
Get Root Permissions via File Manager in Ubuntu 16.04
 
02:19
great for gui sudo actions!
Views: 96183 teklek411
Is Nuclear Power Good Or Bad?
 
13:50
We used to think nuclear power would solve all of our energy problems. What happened? Why do we fear nuclear power and is our fear justified? What is nuclear power and does it still have a place in our energy future? That cool Bill Nye video! http://bigthink.com/videos/views-on-fracking-and-green-energy Special Thanks to: Derek Muller of Veritasium: https://www.youtube.com/1veritasium/ ►Subscribe: http://youtube.com/thegoodstuff ►Let us know what you think of our show!: http://bit.ly/1PrBmTj ►Support us on Patreon: https://www.patreon.com/thegoodstuff ►Follow us on Twitter: http://www.twitter.com/goodstuffshow ►Follow us on instagram: goodstuffshow ►Like us on facebook: http://www.facebook.com/thegoodstuffshow Digital street team: http://goodstuffshow.com/digitalstreetteam Sign up for our mailing list: http://eepurl.com/bnSOcH The Good Stuff is a proud member of the PBS Digital Studios family __________________________________________________________________ Music by: Driftless Pony Club http://www.driftlessponyclub.com/ SHAPERS http://shapers.bandcamp.com/ Image/Video Credits: Derek’s Doc. Twisting the Dragon’s Tail: http://www.pbs.org/show/uranium-twisting-dragons-tail/ Lewis Strauss, By Credit: National Oceanic and Atmospheric Administration/Department of Commerce [1] [Public domain], via Wikimedia Commons, https://en.wikipedia.org/wiki/Lewis_Strauss#/media/File:Lewis_Lichtenstein_Strauss_pers0164.jpg Nuclear Power Plant, By Stefan Kühn (Own work) [GFDL (http://www.gnu.org/copyleft/fdl.html), CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0/) or CC BY-SA 2.5-2.0-1.0 (http://creativecommons.org/licenses/by-sa/2.5-2.0-1.0)], via Wikimedia Commons, https://upload.wikimedia.org/wikipedia/commons/4/4e/Nuclear_Power_Plant_Cattenom.jpg solid uranium disk, [Public domain], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File:HEUraniumC.jpg Pencil Eraser, By en:User:Prosavage2600 [GFDL (http://www.gnu.org/copyleft/fdl.html) or CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0/)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File:Pencil_Eraser.jpg Train Car Full of Coal, By Pechristener (CFR-19 Coal Wagon) [CC BY-SA 2.0 (http://creativecommons.org/licenses/by-sa/2.0)], via Wikimedia Commons, https://upload.wikimedia.org/wikipedia/commons/1/18/Telemeter_on_a_Coal_Train_in_South_Africa.jpg Nuclear Power Plant Cooling Towers,By No machine-readable author provided. Thorbjoern assumed (based on copyright claims). [GFDL (http://www.gnu.org/copyleft/fdl.html) or CC BY 3.0 (http://creativecommons.org/licenses/by/3.0)], via Wikimedia Commons, https://upload.wikimedia.org/wikipedia/commons/5/51/Cooling_towers_stendal_nuclear_power_plant.jpg Power Plant at Night, By Bjoern Schwarz (Flickr: Nuclear power plant "Isar" at night) [CC BY 2.0 (http://creativecommons.org/licenses/by/2.0)], via Wikimedia Commons, https://upload.wikimedia.org/wikipedia/commons/2/29/Nuclear_power_plant_Isar_at_night.jpg Abandoned Nuclear Power Plant, By Brian Stansberry (Own work) [CC BY 3.0 (http://creativecommons.org/licenses/by/3.0)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File%3AHartsville-cooling-tower-tn1.jpg Abandoned Nuclear Power Plant 2, By Tiia Monto [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File%3ACrimea_Nuclear_Power_Plant.jpg Nuclear Plant Cutaway, By Paul K : https://www.flickr.com/photos/bibliodyssey/, https://www.flickr.com/photos/bibliodyssey/4194960040/in/[email protected]/ Nuclear Waste Disposal Vessel, By Bill Ebbesen (Transferred from en.wikipedia) [CC BY 3.0 (http://creativecommons.org/licenses/by/3.0)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File%3ANuclear_waste_container_2010_nevada.jpg Yucca Mountain Tunnel, By Nuclear Regulatory Commission (Flickr) [CC BY 2.0 (http://creativecommons.org/licenses/by/2.0)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File:Yucca_Mountain_tunnel.jpg View of Chernobyl, By Jason Minshull (This photo is the author's own work) [Public domain], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File%3AView_of_Chernobyl_taken_from_Pripyat.JPG chernobyl wide, By Cs szabo at hu.wikipedia [CC BY-SA 2.5 (http://creativecommons.org/licenses/by-sa/2.5), GFDL (http://www.gnu.org/copyleft/fdl.html) or CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0/)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File%3AChernobyl_npp.jpg Stallarator workers on fusion reactor experimental, By Max-Planck-Institut für Plasmaphysik, Tino Schulz (Public Relations Department, Max-Planck-Institut) [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons, https://commons.wikimedia.org/wiki/File%3AWendelstein7-X_Torushall-2011.jpg
Views: 298584 The Good Stuff
Compress and Extract tar and gz files
 
07:25
The tar command on Linux is often used to create .tar.gz or .tgz archive files, also called “tarballs.” This command has a large number of options, but you just need to remember a few letters to quickly create archives with tar. The tar command can extract the resulting archives, too. The GNU tar command included with Linux distributions has integrated compression. It can create a .tar archive and then compress it with gzip or bzip2 compression in a single command. That’s why the resulting file is a .tar.gz file or .tar.bz2 file.
Views: 627 HACK ANONS
cheat - Interactive Cheatsheets - Linux CLI
 
08:04
https://github.com/gotbletu/shownotes/blob/master/cheat_zsh_autocomplete.txt https://github.com/chrisallenlane/cheat https://aur.archlinux.org/packages/cheat-git/ cheat allows you to create and view interactive cheatsheets on the command-line. It was designed to help remind *nix system administrators of options for commands that they use frequently, but not frequently enough to remember.
Views: 2961 gotbletu
Linux : HowTo Encrypt And Decrypt Files With A Password using GPG
 
03:40
Linux : HowTo Encrypt And Decrypt Files With A Password using GPG. To encrypt and decrypt files with a password, use gpg command. It is an encryption and signing tool for Linux/UNIX like operating systems. GnuPG stands for GNU Privacy Guard and is GNU’s tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. Please note that if you ever forgot your password (passphrase), you cannot recover the data as it use very strong encryption. 🌸 Support channel & make donation : https://www.paypal.me/aminenina/5 🌸 Subscribe for more videos : Youtube: https://www.youtube.com/user/aminosni... 🌸 Follow me On Social Media Facebook : https://www.facebook.com/aminosninatos/ *********************************************************************** 🌸 How To Check Bad Blocks Or Bad Sectors On a Hard Disk In Linux https://www.youtube.com/watch?v=jE-I9... 🌸 Linux How To Partition a Hard Drive Using the Parted Command https://www.youtube.com/watch?v=2IoEW... 🌸 Checking or Repairing a File System using fsck in Linux https://www.youtube.com/watch?v=CcV_M... 🌸 How To Monitor the Health of Your Hard Drive in Linux using SMART https://www.youtube.com/watch?v=z1z9R... 🌸 Linux iotop: Monitor your disk Input/Output https://www.youtube.com/watch?v=pWG4v... 🌸 How To use the “du” (Disk Usage) Command in Linux https://www.youtube.com/watch?v=RA4bM... 🌸 How To View Manipulate System Logs In Linux Using Journalctl Command https://www.youtube.com/watch?v=NE-fT-Fwvgw&t=3s 🌸 How To Sync And Backup Files In Linux Using Rsync Command https://www.youtube.com/watch?v=aIMbg7vG6Rg&t=10s 🌸 Linux cURL Command Tips and Tricks https://www.youtube.com/watch?v=hA3BAALWFJI 🌸 Linux tail and multitail commands https://www.youtube.com/watch?v=QnPyWNyCn-U 🌸 Linux How To view Log Files https://www.youtube.com/watch?v=CEYhs_9L01M&t=2s 🌸 How To use the History Command On Linux https://www.youtube.com/watch?v=RkxIWlypB-s 🌸 Tips and Tricks How To manipulate Text Files on Linux https://www.youtube.com/watch?v=Zk9M1w55XO0 🌸 How to Archive, Compress and Extract Files Using the tar Command on Linux https://www.youtube.com/watch?v=8j-ZzOfbclM&t=2s 🌸 Linux - How to split larger files into smaller parts https://www.youtube.com/watch?v=DaC5AWjmQXk 🌸 Linux commands : Top https://www.youtube.com/watch?v=RM7ck63mcHQ ***********************************************************************
Views: 10972 Liv4IT
How to restore your codeblocks
 
01:38
1.Open your codeblocks. 2. Go to view. 3.Go to perspective and select the default. your problem will be solved. thanku
Views: 36366 Saiprasad Duduka
Grub Configuration
 
02:26
The following video will demonstrate how to change the boot loader i.e grub file.
Views: 1045 moreclassesscience
How to Static Link An SFML2 Project on Windows Using MinGW GCC
 
06:40
Ever wanted to compile a program that doesn't depend on external DLLs at the cost of a larger executable file size? Static linking is the way, and you've come to the right place to learn how! In this video, you'll use CMake to generate the SFML build files, build the SFML files using GCC, and write a makefile and test program to compile a static linked SFML project. The two files used to make this tutorial can be downloaded here: https://github.com/GanonCode/SFMLWinGCCStatic
Views: 5042 GanonCode
How To Force a USB mount (when not auto-mounting) in Linux Mint
 
04:13
This process can be used in most other Linux Distributions
Views: 24508 teklek411
SPR-KKR (compiling example, gfortran + Netlib)
 
02:54
Sorry, this compiling kkrscf and others don't work for MPI calculation in my case. Please, use single core calculation. ############################################################################### # Here the common makefile starts which does depend on the OS #### ############################################################################### # # FC: compiler name and common options e.g. f77 -c # LINK: linker name and common options e.g. g77 -shared # FFLAGS: optimization e.g. -O3 # OP0: force nooptimisation for some routiens e.g. -O0 # VERSION: additional string for executable e.g. 6.3.0 # LIB: library names e.g. -L/usr/lib -latlas -lblas -llapack # (lapack and blas libraries are needed) # BUILD_TYPE: string "debug" switches on debugging options # (NOTE: you may call, e.g. "make scf BUILD_TYPE=debug" # to produce executable with debugging flags from command line) # BIN: directory for executables # INCLUDE: directory for include files # (NOTE: directory with mpi include files has to be properly set # even for sequential executable) ############################################################################### BUILD_TYPE ?= #BUILD_TYPE := debug VERSION = 6.3 ifeq ($(BUILD_TYPE), debug) VERSION := $(VERSION)$(BUILD_TYPE) endif BIN = . #BIN=~/bin #BIN=/tmp/$(USER) LIB = -L/usr/local/lib -llapack -lblas #LIB = $(LIB_MKL) LIBMPI = # Include mpif.h INCLUDE = -I/usr/lib/openmpi/include OP0 = ifeq ($(BUILD_TYPE), debug) # FFLAGS = -O0 -g FFLAGS = -O0 -g -Wall -fbounds-check -fbacktrace # FFLAGS = -O0 -check all -traceback -fpe0 -g -fp-stack-check -ftrapuv -CU ### for ifort else FFLAGS = -O2 -m64 # FFLAGS = -O2 -axSSE4.2 -diag-disable remark ### for ifort endif FC = mpif90.openmpi -c $(FFLAGS) $(INCLUDE) LINK = mpif90.openmpi $(FFLAGS) $(INCLUDE) MPI=MPI
Solved || How to install graphics.h in code blocks || 100% working.
 
05:17
Solved || How to install graphics.h in code blocks || 100% working. Detailed procedure for accesing graphics.h in codeblocks ....... download WinBGIm http://winbgim.codecutter.org .......change in codeblocks,other linker options -lbgi -lgdi32 -lcomdlg32 -luuid -loleaut32 -lole32 ......link to download libbgi.a , given at last in note https://www.cs.colorado.edu/~main/bgi/dev-c++/
Views: 68859 Run& Chase
How to Compile and Install Simple Screen Recorder(SSR) On any GNU/Linux Distro.
 
09:15
SSR is the by far the best screencast recorder i have used, but since its not avaliable on all the repository of the GNU/linux distributions its difficult to install. Links: http://www.maartenbaert.be/simplescreenrecorder/ --- Main Page https://github.com/MaartenBaert/ssr ---- Github/Source Code What is SSR accorfing to Developer: SimpleScreenRecorder is a Linux program that I've created to record programs and games. There were already a few programs that could do this, but I wasn't 100% happy with any of them, so I created my own. My original goal was to create a program that was just really simple to use, but as I was writing it I started adding more and more features, and the result is actually a pretty powerful program. It's 'simple' in the sense that it's easier to use than ffmpeg/avconv or VLC, because it has a straightforward user interface. simple screen recorder arch linux, simple screen recorder ubuntu 16.04, simple screen recorder, simple screen recorder linux, simple screen recorder apt-get, simple screen recorder best settings, simple screen recorder constant rate factor, simple screen recorder centos 7, simple screen recorder command line, visual basic screen recorder code, simple screen recorder download, simple screen recorder deb, basic screen recorder download, install simple screen recorder elementary, simple screen recorder for ubuntu, simple screen recorder free, simple screen recorder gif, simple screen recorder github, simple screen recorder install, simple screen recorder install linux,
Views: 1144 newbie-tech
error couldn't save project code block
 
01:40
probleme d'ouvrire code::block lien : https://www.youtube.com/watch?v=m3S4fSgODtQ keyword: solve codeblocks environment error, Codeblocks cannot find compiler See Note: which version includes additionally the GCC/G++ compiler and GDB debugger from TDM-GCC. you must download this. go, where you install codeBlocks, such as: C:/Program Files/CodeBlocks/MinGW code blocks environment error, troubleshooting problem solve, how to overcome codeblocks environment error, codeblocks compiler error,codeblocks Environment Error, How to solve code block compiler problem, How to solve codeblock compiler problem Code::Blocks is a free C, C++ and Fortran IDE built to meet the most demanding needs of its users. It is designed to be very extensible and fully configurable. NOTE: The codeblocks-16.01-setup.exe file includes Code::Blocks with all plugins. The codeblocks-16.01-setup-nonadmin.exe file is provided for convenience to users that do not have administrator rights on their machine(s). NOTE: The codeblocks-16.01mingw-setup.exe file includes additionally the GCC/G++ compiler and GDB debugger from TDM-GCC (version 4.9.2, 32 bit, SJLJ). The codeblocks-16.01mingw_fortran-setup.exe file includes additionally to that the GFortran compiler (TDM-GCC). NOTE: The codeblocks-16.01(mingw)-nosetup.zip files are provided for convenience to users that are allergic against installers. However, it will not allow to select plugins / features to install (it includes everything) and not create any menu shortcuts. For the "installation" you are on your own. Best C++ Complier : How to Install Code:Block in Windows 8, Windows c++ - Setting up MingW and Code::Blocks in Windows 8 64 Related download links: Best C++ Complier : How to Install Code:Block in Windows 10 , Windows c++ - Setting up MingW and Code::Blocks in Windows 10 64 Searches related to install codeblocks on windows 10 how to install codeblocks on mac download codeblocks for windows download codeblocks for windows 10 64 bit download codeblocks for windows 8 install gcc windows { Codeblocks IDE 13.12: http://www.codeblocks.org/downloads/26 MinGW W64: http://mingw-w64.sourceforge.net/down... SDL 2.0.3: http://libsdl.org/download-2.0.php Projects: http://www.libsdl.org/projects/ SDL 2.0.2: https://goo.gl/7yGlzA } it nothing In the linker options paste this for image:- "-lmingw32 -lSDL2main -lSDL2 -lSDL2_image " and do the same for other linker as well. Installing Code::Blocks How do I Install Code::Blocks HOWTO: Installing Code::Blocks 10.05 How do you install Irrlicht on Code::Blocks? How do you install CodeBlock on ubuntu? codeblocks /bin/sh: g++: not found Installing codeblocks on ubuntu Installing Code::Blocks on Ubuntu 10.04? How to install CodeBlocks 13.12 with Compilers [GCC] . Unable to build a program in Codeblocks Solution Open Codeblocks-Settings-Compiler-Go to Tool chain executables tab- Enter the address of the compiler in your PC and hit OK. ( Usually C:\Program Files\CodeBlocks\MinGW\bin) code blocks not working problems solution "bangla tutorial" . C++ Code::Blocks error; uses an invalid compiler. Probably the toolchain path C++ tutorials for code::blocks error "Hello World - Debug" uses an invalid compiler. Probably the toolchain path within the compile the compiler options is not setup correctly?! Skipping... I'll show you how to fix this problem! How to solve code block compiler problem This video is on how to get your compiler working again on codeblock
Views: 19530 Ab2 INFO
Installing Ubuntu & Android On The Same File System (Natively) - Dual Boot Extraordinaire On PC
 
45:36
Dual Boot Extraordinaire - Android And Linux On The Same PC In One Partition Running Natively Without Virtualization on my PC A bit of a waffle, join me in my quest to to have Ubuntu Linux and Android 6.x running on the same machine. To have the best of both worlds. Steam PC gaming as well as Android (retro) gaming. This video documents how I went about it and also me succeeding in getting a dual boot system without the need to have Android (RemixOS) on a separate partition. It will have Android actually reside in its own folder in the Linux File System, sharing the space. This results in a dual booting Android PC that has a whopping 900Gb free space available to it! :) This video shows you how I achieved it and perhaps it allows you to replicate it. Mind you this is NOT a tutorial. It is just me going about my business installing Ubuntu and Android on the same PC. - Creating an Android folder in the root of the Linux machine to house the Android Kernel and the necessary boot images - Creating a data folder inside the Android folder to house the Android user date - Adding an OS entry into the Grub bootloader options - Adding the Gub bootloader to a working Linux system and repairing the entries - Finding out the Core2Duo Machine doesn't like Android - Changing to a slower (graphics is Ironlake Intel Graphics instead of GTX750 Nvidia) i3 machine that does like Android - Running games on Steam (Linux) - Running games on Android Two OSes sharing the same file system: Ubuntu 16.04 LTS Remix OS 3.0 Enjoy the waffle.
Views: 3027 lactobacillusprime
C++11 (gcc/g++ using MinGW64) in Eclipse - Installation on Windows 10 + First Program
 
12:34
This demonstrates how to install MinGW64 (a gcc/g++ compiler tool chain for Windows) and the Eclipse CDT integrated development environment (IDE) to enable C++ compilation on Windows 10. The tutorial ends with a quick first program which demonstrates c++11 features.
Views: 34838 Daniel Grissom
How To Get The Grub Bootloader on UEFI!
 
01:36
Here's how to get the grub bootloader on UEFI. How to get into BIOS : http://www.makeuseof.com/tag/enter-bios-computer/ Song used : Title: Subtact - Restart Video Link: https://www.youtube.com/watch?v=M5A46A2txC4 iTunes Download Link: https://itunes.apple.com/us/album/restart-single/id1017135213 Artist Link: https://soundcloud.com/subtact
Views: 37160 Edwan Tham